Product Code: FASTSETPALLET30
FastSet Flexible 30 bags of 20kg
PALLET DEAL £359.99 inc VAT and FREE delivery
(Please note the next day delivery service is not available on this product, due to the size and weight. Delivery is 2-3 days approx.)
Covers 5m2 when installing insulation boards
Covers 2.5m2 per bag over underfloor heating
ProRapid RS is a rapid set, polymer modified, premium grade cementitious tile adhesive, ideal for natural stone, porcelain and ceramic tiles where exceptional bond and rapid set are essential. It is suitable for both wet and dry conditions and is formulated to adhere to most common substrates including screwed and fixed over-boarded wooden floors.
Classified C2FT.
Available in white and grey.
20KG Bags
Customer Reviews
Write an online review and share your thoughts with other shoppers!
PREPARATION:
Before commencing, all surfaces must be clean, dry and strong
enough to support the weight of the tiles and the adhesive.
Remove all loose dust, dirt, oil, grease and other contaminants
likely to affect adhesion.
UNDERFLOOR HEATING:
On concrete floors, the heating element should be embedded in
a layer of adhesive and allowed to set prior to fixing tiles.
TILE FIXING:
Add 4 Parts FastSet Flexible to 1 Part cold clean tap water by
weight in a clean mixing vessel. Mix to a smooth creamy consistency
either by hand or using a slow mechanical mixing paddle. Mix only
sufficient that can be used in 40 mins. Product that has started
to set must be discarded.Apply adhesive to the floor using a
notched trowel such that a continuous bed of adhesive between
3mm and 6mm is achieved when tiles are applied.Adhesive
should also be applied to the back of deep studded tiles to
cover the studs. Ensure the adhesive is still moist when tiles are
pressed into place. Check occasionally there is good transfer of
adhesive onto the back of the tile. Clean surplus adhesive from
the tiles and joints as soon as possible as set adhesive will prove
difficult to remove later. Clean all tools after use.
INFORMATION
Ultra ProRapid RS is a rapid set, polymer modified, premium grade cementitious tile adhesive for both interior and exterior use. It is ideal for natural stone, porcelain and ceramic tiles where exceptional bond and rapid set are essential.
The product is suitable for both wet and dry conditions and is formulated to adhere to most common substrates including screwed and fixed over-boarded wooden floors. Ultra ProRapid RS conforms to the requirements of EN 12004 Class C2F and is available in grey and white.
SURFACE PREPARATION
Ensure that the tiling surface is clean, dry and firm. It should be free of dust, dirt, oil, grease or any other contaminants. Please ensure that the surface is strong enough to support the weight of the tile and adhesive. To encourage best adhesion to your substrate when applying adhesive to porous surfaces it is advisable that the area be primed first. Ultra Flexi-Prime is an ideal surface primer, as it will help to prevent water penetration, and increase bond strength.
MIXING
Ultra ProRapid RS should be added slowly to clean water (20kg White: 4.8 litres of water; 20kg Grey: 4.4 litres of water) and mixed thoroughly to give a slump free easily worked mortar. Once mixed the mortar is immediately ready for use and has a working time of approximately 20 minutes at 20°C. Mix only sufficient material to be used within the working time, do not remix or rewet.
APPLICATION
Apply the adhesive to a thickness of 3-6mm up to 1m2 at a time. On internal walls use a notched trowel leaving solid ribs, i.e. 3mm x 3mm at 6mm centres for mosaics, 5mm x 5mm at 10mm centres for wall tiles, and 8mm x 8mm at 16mm centres for floor tiles. On floors and external areas, use the solid bed trowel method.
Large studded tiles should be ‘buttered’. Bed the tiles in with a slight twisting action. Leave spaces between the tiles for grouting (approximately 1-3mm for walls and 2-20mm for floors). Clean off excess adhesive from the tile face and grout lines with a damp cloth before it sets.
CLEANING
Tools should be thoroughly cleaned in water to remove excess materials immediately after use.
GROUTING
Leave for a minimum of 2 hours before grouting and/or walking on the tiles. This time may be extended on impervious surfaces. Instarmac’s technical team will be happy to suggest the best Ultra Grout for ultimate performance.
FEATURES & BENEFITS
Ultra ProRapid RS is a rapid set, high strength, wall & floor tile adhesive.
Suitable for heavily trafficked areas.
TECHNICAL DATA
Packaging:
20kg – triple walled paper bags.
Standard Conformity:
Conforms to the requirements of EN 12004 Class C2F.
Bed Thickness & Coverage:
1-12mm. At 3mm bed thickness you will require 4.5kg of material per m2.
Open Time:
20 minutes depending upon temperature and substrate.
Set Time:
2 hours dependent upon temperature and substrate.
Storage:
This product must be stored in unopened bags, clear of the ground in cool dry conditions
Shelf Life:
6 months in above conditions.
Please note: The use of this product
after the end of thedeclared storage
period may increase the risk of an
allergic reaction. High temperatures
and high humidity will lead to a reduced shelf life.
Colours:
Grey & White.
Note:
All tiling should follow the correct British/European standard
incorporate movement joints as specified
therein.
How much does it cost?
As standard we include FREE NEXT WORKING DAY DELIVERY to all UK mainland addresses (excluding, Channel Islands & Eire) on all heating products (this does not include tiling materials) Delivery outside the mainland UK may be arranged by prior agreement. You will be notified of the amount of the charge for this service and will at that point have to make a decision whether you wish to proceed with your order.
Delivery types available;
Standard delivery (FREE)
Next working day, before 9am (£25.00)
Next working day, before 10am (£10)
How long does it take?
Items ordered before 2pm on any business day (Monday - Friday) excluding Bank Holidays should be delivered next business day (excluding Saturday), anytime up to 6.00pm. The standard delivery charge does not guarantee next day delivery; however every effort is made by us & the couriers to achieve this goal. Orders taken on Friday after 2pm, Saturday or Sunday will be dispatched on Monday (excluding Bank Holidays) for delivery on Tuesday. Orders taken on Friday before 2pm will be dispatched on Friday for delivery on Monday (excluding Bank Holidays). However, We rely upon the services of third party couriers, and whilst we endeavour to always deliver in a timely manner there are unfortunately a few occasions when the couriers fail to deliver on the appointed day. This happens rarely, but because it does occur, albeit occasionally, we cannot be held responsible for the late delivery of an item, or any costs incured by customers tradesman unable to work, please ensure you have your materials before booking in any trades
Telephone Contact
+44 (0) 1827 872 244
Email Queries
info@instarmac.co.uk
Postal Address
Instarmac Group plc
Head Office
Danny Morson Way
Birch Coppice
Business Park
Dordon, Tamworth
B78 1SE
