[TIME]
Product Code: HSMAT200W7M
Electric Underfloor Heating from the underfloor heating store is part of the HeatStore™ Underfloor Heating range. Our Electric Underfloor Heating mats, provide a reliable and effective underfloor heating system that can work with tiles and many other floor coverings (installation methods differ, please call us for advice). The electric underfloor heating cable is attached to a fibreglass mesh, which can be easily rolled out before tiling. The HeatStore underfloor heating mat costs on average 0.7 pence per hour to run (depending on insulation quality in the property) and use the clean renewable power of electricity. Underfloor heating mats do not produce convection currents like a radiator system and so are healthier and do not produce dust marks from their chimney effect. HeatStores underfloor heating mat system is an advanced DualCore heating element which means there is only one power lead. Underfloor Heating is a perfect, modern and desirable heating system perfect for kitchens, bathrooms and conservatories and the HeatStore™ Electric Underfloor Heating System is the best all round solution, with a Lifetime Guarantee and full technical support provided free of charge. HeatStore™ Underfloor Heating mats are supplied complete with full color instructions. Please choose an electric underfloor heating mat that will cover 90% of your floor area. It is best to order slightly less than you need than have too much as the cables CAN NOT be cut or shortened. Please note this is an underfloor heating mat only it does not contain a thermostat or other fitting accessories. This is a 200 watt per meter mat.
200 watt per meter underfloor heating mats are normally used in areas where high heat loss is a problem, such as conservatories
When used in standard installations heat up times will be approx 25% faster than with standard 150w/m2 mats
Please see below for our basic installation guidelines - Or click here for details of our Installation Service
Underfloor Heating Basic Installation Guide
Step 1 - First prepare the subfloor ensuring that it is free from dirt or debris
Step 2 - Prime the floor using primer contained in kit.
Step 3 - If using tile backer boards or XPS Premium boards, do so in accordance with seperate instructions provided, using flexi tile adhesive.
Step 4 - Check the underfloor heating with a multimeter to ensure resistance is correct
Step 5 - Begin rolling out the underfloor heating mat and cut as shown above when reaching the end of the room (not cutting the cable!)
Step 6 - Run the power lead from the start of the mat up to the thermostat position.
Step 7 - Install the floor probe between two underfloor heating cables
Step 8 - If possible covers the underfloor heating cables with self levelling compound
Please note a full set of color instructions is included with your underfloor heating mat, the above is a basic indication of installation procedures.
Our Under Tile Heating mat is the same type of cable as the loose cable drum but the cable is spaced evenly on a fibreglass mesh, thus saving time on the installation and ensuring that the spacing has been correctly carried out. The heating cable is a series type heating cable of with a twin conductor with cold lead of 3.0M on one side. The cable has resistance heating wire provided with a primary insulation of fluoropolymer then covered with metal shielding and final outer sheath of PVC. The final outer dia of twin conductor cable is 3.2mm.
The Hot and Cold lead junctions are uniquely designed to make them 100% foolproof.
Standards : Meets all test requirements of IEC 60335.
Approvals : SEMKO certified.
Cost-effective : Under floor heating provides heat where required, resulting in optimal heat utilization and minimal losses.
Flexibility : Can be laid on any area, or any floor layout.
Comfort : Close and uniform spacing of heating cables, associated with thermostat controls to select temperature requirements, provides higher comfort.
DIY : Underfloor heating Stores DIY kits with clear instruction manuals, make it very simple to install
Range : A wide range of heat loads and sizes ensure suitability to all kinds of floorings.
How much does it cost?
As standard we include FREE NEXT WORKING DAY DELIVERY to all UK mainland addresses (excluding, Channel Islands & Eire) on all heating products (this does not include tiling materials) Delivery outside the mainland UK may be arranged by prior agreement. You will be notified of the amount of the charge for this service and will at that point have to make a decision whether you wish to proceed with your order.
Delivery types available;
Standard delivery (FREE) Next working day, before 9am (£25.00) Next working day, before 10am (£10)
How long does it take?
Items ordered before 2pm on any business day (Monday - Friday) excluding Bank Holidays should be delivered next business day (excluding Saturday), anytime up to 6.00pm. The standard delivery charge does not guarantee next day delivery; however every effort is made by us & the couriers to achieve this goal. Orders taken on Friday after 2pm, Saturday or Sunday will be dispatched on Monday (excluding Bank Holidays) for delivery on Tuesday. Orders taken on Friday before 2pm will be dispatched on Friday for delivery on Monday (excluding Bank Holidays). However, We rely upon the services of third party couriers, and whilst we endeavour to always deliver in a timely manner there are unfortunately a few occasions when the couriers fail to deliver on the appointed day. This happens rarely, but because it does occur, albeit occasionally, we cannot be held responsible for the late delivery of an item, or any costs incured by customers tradesman unable to work, please ensure you have your materials before booking in any trades.
