Water underfloor heating multiple room kit - 8 circuits 160m2

Water Underfloor Heating Installation Instructions

Click here to download a PDF file of our installation instructions

Water Underfloor Heating Fitting Service

The underfloor heating store also offer a fully approved water underfloor heating installation service click here for more details.

Floor Screeding Service

In conjunction with our water and electric underfloor heating installation service we also offer a floor screeding service click here for more details

There are a choice of thermostats with our water underfloor heating kits :

   The Heatmiser DS1 Manual Dial Type Thermostat

The Heatmiser DS1 is our 230v, electronic room thermostat, ideal for conventional or combi-boiler systems. This thermostat is used in conjunction with a separate programmer.

The following features are available

• Power On & Heat On Indication
• Modern Apperance
• Easily increase or decrease the required temperature
• Variable Switching Differential
• Range: 05-35°C
• Supply: 230v
• Outputs: Volt free 3A Max
• Dimensions:  92mm x  92mm x 34mm (Height, Width, Depth)

The Heatmiser PRT Digital Thermostat

The Heatmiser PRT is a programmable room stat and programmer in one, providing up to 4 different temperatures at different times of the day.

Energy Saving   What's more, the PRT includes Optimum Start which is an energy saving feature designed to reduce the amount of heat up time required by automatically learning the heat up time your home needs.

• Large display
• 5/2 day or 7 Day Programming  (Selectable in software)
• Self Learning Optimum Start on 1st and 3rd Level
• 4 Comfort Levels per Day
• Temperature Hold Facility
• Holiday Facility
• Automatic blue back-light (Turns off after 30 seconds)
• Flush mounting
• °C / °F Selectable
• Up to 4 changes in room temperature
• Key Locking Facility
• Frost protection with adjustable temperature setting.
• Remote control optional
• Supply: 230v /
• Outputs: Volt free 3A Max

Dimensions:  98mm x  85mm x 13mm (Height, Width, Depth)

(Please note this thermostat is flush mounting and so requires a back box)

The Heatmiser PRT-TS TouchScreen Digital Thermostat

The Heatmiser PRT-TS is our 230v Touchscreen, programmable room thermostat, ideal for conventional or combi-boiler systems. This thermostat can be used to replace a mechanical thermostat.

The following features are available

• Blue back-lit Touchscreen
• Weekday/Weekend or 7 Day Programming (Selectable in Software)
• Holiday Function
• Hold Function
• Automatic blue back-light (Turns off after 30 seconds)
• Flush mounting
• °C / °F Selectable
• Key Locking Facility
• Frost protection with adjustable temperature setting.
• Easily increase or decrease the required temperature
• Supply: 110V / 230v
• Outputs: Volt free 3A Max
• Dimensions:  110x100x17mm
• *Three wires, excluding earth, is required for this thermostat.

What is the Holiday function?  The holiday function reduces the set temperature in your home for a programmable number of days. At the end of the holiday, the thermostat returns to the programmed temperature ensuring your home is warm on your return.

What is the Hold function? The hold function allows you to hold a temperature for a number of hours. An ideal use of this function is for parties or when you are going out.

Digital Thermostat with wireless capability



Superfast install, no need to chase walls in room!
Each thermostat comes with a wireless receiver which is located next to the pump.
This thermostat can be wall mounted or comes with a stand and can be moved around the room.

The Heatmiser PRT-W Kit comprises of a Heatmiser PRT-W Programmable thermostat and RC1-W wireless receiver.  The receiver is hard wired to the boiler, so is normally positioned next to the boiler or you could use the existing thermostat cabling. The wireless thermostat is then wall mounted within range of the receiver (up to 100 meters open space)

Features include

•     Wireless Thermostat - 868MHz
• Distance: Up to 100 Meters Open Space
• Large Back Lit Display
• 5/2 or 7 Day Programming Modes
• 4 Comfort Levels per Day
• Optimum Start
• Wireless Fail Safe Function
• ºC/F Option
• 05ºC - 35ºC Range
• Holiday Function
• Hold Function
• Wall Mount
• Frost Protection
• Key Lock Facility
• Battery: 2 x AAA (Included)
• Compatible with UH1-W, RC1-W, WR1
• Remote Air Sensing Facility (Ideal for measuring the air temperature up to 20 meters from the thermostat, in bathrooms for example. Remote sensor probe required, not included)
• Dimensions: 98mm x  85mm x 24mm (Height, Width, Depth)    

Single Zone Kit Includes

1 x PRT-W  1 x RC1-W

Digital       


Digital TouchScreen Thermostat with wireless capability

The Heatmiser PRT-WTS is our programmable wireless thermostat with Touchscreen display, ideal for those looking to relocate their existing thermostat.

The Heatmiser PRT-WTS works with the Two Zone Heatmiser RC1-WTS Wireless receiver. The receiver is hard wired to the boiler, so this can be located next to the boiler or you could use the existing thermostat cabling. The wireless thermostat can then be desk or wall mounted with range of the receiver (up to 100 meters open space) enabling you to relocate your thermostat.

Working in the Office, Watching TV in the Living Room? The Touchscreen Wireless Thermostat series is supplied with a wall mounting plate however you are more likely to make use of the desk stand as it allows you to decide exactly where to place the thermostat. For those with a single thermostat in your home, you dont have the benefit of different heating zones. However, using this Heatmiser Wireless thermostat allows you to move the thermostat around your home, so for example in the office during the day and living room during the evening.

Features include

• Wireless Thermostat - 433MHz
• Distance: Up to 100 Meters Open Space
• Large Back Lit Touchscreen Display
• 5/2 or 7 Day Programming Modes
• 4 Comfort Levels per Day
• Optimum Start
• ºC/F Option
• 05ºC - 35ºC Range
• Holiday Function
• Hold Function
• Wall Mount or Desk Stand
• Rechargeable Battery (Approx 6 month between charges)
• Mini USB to USB cable provided to allow for recharging from PC
• Frost Protection
• Key Lock Facility
• Dimensions: 109mm x  99mm x 20mm (Height, Width, Depth)

Single Zone Kit Includes

1 x PRT-WTS  1 x RC1-WTS  

Heatmiser Touchpad





Please note that when ordering the TouchPad upgrade all thermostats supplied will be a 12 volt version.

Designed to work our 12v Network Thermostats, the Heatmiser Touchpad provides central control of your home heating system.

Up to 32 rooms can be controlled from the full colour TFT Display meaning that walking around each room to turn up or down the heating is a thing of the past.

The Touchpad is also fully compatible with the Heatmiser Netmonitor system, our remote access system.

Features at Glance

Home and Away

This feature gives you a simple way of turning off your heating system whilst you are away. On your return, pressing the Home button will re-enable the system. Ideal when you have a holiday home and are not sure when you will return.

Profiles

Gives the ability to store a set of comfort levels for a group of rooms. This setting can be applied as and when required, for example at the start of a new shift.

Temperature Hold

Use this function to hold a desired temperature for a fixed period, ideal for unexpected activities. Apply to a single or multiple rooms.

Holiday

Use the holiday feature to put the heating into frost mode whilst you are away. At the end of the holiday, each room will revert back to the programmed time, ensuring your home is warm on your return.

Copy Facility

Save time - copy comfort levels between rooms.

Auto GMT Correction

Automatically adjusts the clocks in all of the thermostats at the start of summer and winter time.

History

The Touchpad will store hours run and temperature history.

USB Export

The temperature log can be exported via the USB connection.