Product Code: WATERKIT30M2MAN
water underfloor heating with the Lowest price online! You will not find this kit at a lower price anywhere in the UK!
Single room kits are ideal for combining one area of water underfloor heating (eg. living room) with a standard radiator system.
Note! These kits feature water temperature control, beware of systems without this facility!
Kits include:
Grundfos Single Circuit Constant Supply Temperature Unit
Pipe (PEX-AL-PEX) 120 meters for a 30m2 area
Edging insulation
Pipe staples
Water Underfloor Kits are supplied as standard with a Manual Room Thermostat but to get the best from your system we suggest upgrading to a digital thermostat, please see below.
Standard manual thermostat
Digital Thermostat (Optional Upgrade)
TouchScreen Digital Thermostat (Optional Upgrade)
Digital Thermostat with wireless capability (Optional Upgrade)
Superfast install, no need to chase walls in room!
Each water underfloor heating thermostat comes with a wireless receiver which is located next to the pump.
This thermostat can be wall mounted or comes with a stand and can be moved around the room.
For the ultimate upgrade to the touchscreen Digital TouchScreen Thermostat with wireless capability - (Optional Upgrade)
Amazing easy install, no wiring to each room! Each thermostat comes with a wireless receiver which is located next to the pump. This thermostat can be wall mounted or comes with a stand and can be moved around the room.
Customer Reviews
Write an online review and share your thoughts with other shoppers!
There are a choice of thermostats with our water underfloor heating kits :
The Heatmiser DS1 Manual Dial Type Thermostat
The Heatmiser DS1 is our 230v, electronic room thermostat, ideal for conventional or combi-boiler systems. This thermostat is used in conjunction with a separate programmer.
The following features are available
-
Power On & Heat On Indication
-
Modern Apperance
-
Easily increase or decrease the required temperature
-
Variable Switching Differential
-
Range: 05-35°C
-
Supply: 230v
-
Outputs: Volt free 3A Max
-
Dimensions: 92mm x 92mm x 34mm (Height, Width, Depth)
Important Note: This thermostat is an electronic dial thermostat, offering greater control when compared with standard bi-metallic thermostats. This thermostat does need at least 3 wires to operate (Live, Neutral and Switch wire) Please check your wiring and the manual download to ensure your system is compatible.
The Heatmiser PRT Digital Thermostat
The Heatmiser PRT is a programmable room stat and programmer in one, providing up to 4 different temperatures at different times of the day.
Energy Saving What's more, the PRT includes Optimum Start which is an energy saving feature designed to reduce the amount of heat up time required by automatically learning the heat up time your home needs.
-
Large display
-
5/2 day or 7 Day Programming (Selectable in software)
-
Self Learning Optimum Start on 1st and 3rd Level
-
4 Comfort Levels per Day
-
Temperature Hold Facility
-
Holiday Facility
-
Automatic blue back-light (Turns off after 30 seconds)
-
Flush mounting
-
°C / °F Selectable
-
Up to 4 changes in room temperature
-
Key Locking Facility
-
Frost protection with adjustable temperature setting.
-
Remote control optional
-
Supply: 230v /
-
Outputs: Volt free 3A Max
Dimensions: 98mm x 85mm x 13mm (Height, Width, Depth)
(Please note this thermostat is flush mounting and so requires a back box)
The Heatmiser PRT-TS TouchScreen Digital Thermostat
The Heatmiser PRT-TS is our 230v Touchscreen, programmable room thermostat, ideal for conventional or combi-boiler systems. This thermostat can be used to replace a mechanical thermostat.
The following features are available
-
Blue back-lit Touchscreen
-
Weekday/Weekend or 7 Day Programming (Selectable in Software)
-
Holiday Function
-
Hold Function
-
Automatic blue back-light (Turns off after 30 seconds)
-
Flush mounting
-
°C / °F Selectable
-
Key Locking Facility
-
Frost protection with adjustable temperature setting.
-
Easily increase or decrease the required temperature
-
Supply: 110V / 230v
-
Outputs: Volt free 3A Max
-
Dimensions: 110x100x17mm
-
*Three wires, excluding earth, is required for this thermostat.
What is the Holiday function? The holiday function reduces the set temperature in your home for a programmable number of days. At the end of the holiday, the thermostat returns to the programmed temperature ensuring your home is warm on your return.
What is the Hold function? The hold function allows you to hold a temperature for a number of hours. An ideal use of this function is for parties or when you are going out.
Digital Thermostat with wireless capability
Superfast install, no need to chase walls in room!
Each thermostat comes with a wireless receiver which is located next to the pump.
This thermostat can be wall mounted or comes with a stand and can be moved around the room.
The Heatmiser PRT-W Kit comprises of a Heatmiser PRT-W Programmable thermostat and RC1-W wireless receiver. The receiver is hard wired to the boiler, so is normally positioned next to the boiler or you could use the existing thermostat cabling. The wireless thermostat is then wall mounted within range of the receiver (up to 100 meters open space)
Features include
-
Wireless Thermostat - 868MHz
-
Distance: Up to 100 Meters Open Space
-
Large Back Lit Display
-
5/2 or 7 Day Programming Modes
-
4 Comfort Levels per Day
-
Optimum Start
-
Wireless Fail Safe Function
-
ºC/F Option
-
05ºC - 35ºC Range
-
Holiday Function
-
Hold Function
-
Wall Mount
-
Frost Protection
-
Key Lock Facility
-
Battery: 2 x AAA (Included)
-
Compatible with UH1-W, RC1-W, WR1
-
Remote Air Sensing Facility (Ideal for measuring the air temperature up to 20 meters from the thermostat, in bathrooms for example. Remote sensor probe required, not included)
-
Dimensions: 98mm x 85mm x 24mm (Height, Width, Depth)
Single Zone Kit Includes
1 x PRT-W 1 x RC1-W
Digital
Digital TouchScreen Thermostat with wireless capability
The Heatmiser PRT-WTS is our programmable wireless thermostat with Touchscreen display, ideal for those looking to relocate their existing thermostat.
The Heatmiser PRT-WTS works with the Two Zone Heatmiser RC1-WTS Wireless receiver. The receiver is hard wired to the boiler, so this can be located next to the boiler or you could use the existing thermostat cabling. The wireless thermostat can then be desk or wall mounted with range of the receiver (up to 100 meters open space) enabling you to relocate your thermostat.
Working in the Office, Watching TV in the Living Room? The Touchscreen Wireless Thermostat series is supplied with a wall mounting plate however you are more likely to make use of the desk stand as it allows you to decide exactly where to place the thermostat. For those with a single thermostat in your home, you dont have the benefit of different heating zones. However, using this Heatmiser Wireless thermostat allows you to move the thermostat around your home, so for example in the office during the day and living room during the evening.
Features include
-
Wireless Thermostat - 433MHz
-
Distance: Up to 100 Meters Open Space
-
Large Back Lit Touchscreen Display
-
5/2 or 7 Day Programming Modes
-
4 Comfort Levels per Day
-
Optimum Start
-
ºC/F Option
-
05ºC - 35ºC Range
-
Holiday Function
-
Hold Function
-
Wall Mount or Desk Stand
-
Rechargeable Battery (Approx 6 month between charges)
-
Mini USB to USB cable provided to allow for recharging from PC
-
Frost Protection
-
Key Lock Facility
-
Dimensions: 109mm x 99mm x 20mm (Height, Width, Depth)
Single Zone Kit Includes
1 x PRT-WTS 1 x RC1-WTS
